Hi there! does anyone uses a short shifter in your cars? I think the shift positions in the gears are too long, I don´t know if you can understand...
I found many short shifters kits for various cars in ebay, but for Citroen ZX...?
Thanks ^^
| ZX16V.net http://zx16v.net/forum/ |
|
| Short shifter? http://zx16v.net/forum/viewtopic.php?f=17&t=300 |
Page 1 of 1 |
| Author: | edsonmassao [ Sun Feb 04, 2007 9:23 pm ] |
| Post subject: | Short shifter? |
Hi there! does anyone uses a short shifter in your cars? I think the shift positions in the gears are too long, I don´t know if you can understand... I found many short shifters kits for various cars in ebay, but for Citroen ZX...?
Thanks ^^ |
|
| Author: | whitty_zx [ Sun Feb 04, 2007 9:57 pm ] |
| Post subject: | |
look for one for 306 s16 should fit fine same gearbox and linkage as the zx |
|
| Author: | edsonmassao [ Sun Feb 04, 2007 10:43 pm ] |
| Post subject: | |
whitty_zx wrote: look for one for 306 s16 should fit fine same gearbox and linkage as the zx
humm, but my ZX uses the xu10j4rs engine, is the same gearbox? |
|
| Author: | whitty_zx [ Mon Feb 05, 2007 6:39 pm ] |
| Post subject: | |
they both use the be3 gearbox |
|
| Author: | edsonmassao [ Mon Feb 05, 2007 7:45 pm ] |
| Post subject: | |
thanx for your help, Whitty! I found only B&M kits in ebay, but the price is very expensive
do you know other brand or shop that ships to Brazil? 
|
|
| Author: | Max16V [ Wed Apr 04, 2007 4:40 am ] |
| Post subject: | |
Look at this link mate. They make short shifts for 306. http://www.griffiths-engineering.co.uk/ |
|
| Author: | edsonmassao [ Fri Apr 06, 2007 12:40 am ] |
| Post subject: | |
thanx for the link, Max! some time ago some guys made a quickshit for 206 copying the design of the Griffiths Engineering piece. Now I see that they developed an one to 306 that will fit in our cars 
|
|
| Author: | ZX-Cruiser [ Fri Apr 06, 2007 9:27 am ] |
| Post subject: | |
They're not expensive. Anybody have expierience with this QS? |
|
| Author: | Era [ Wed Jul 25, 2007 10:05 pm ] |
| Post subject: | |
I made my own on my ZX TD took out the gear shifter and cut of the T that sticks down under the car added 1.5cm and suddenly a home made short shift. Not sure what gearbox the TD uses but I think it`s the same as the 16v Erik Oslo in Norway |
|
| Author: | ZX-16V [ Thu Dec 06, 2007 7:30 pm ] |
| Post subject: | |
i use QS in my zx 16v,my mechanicl made it for me,if you had the chance of driving Subaru STI its almost the same feeling when you shift gears(not in the power.. )its realy fun to drive with QS,gives 100% feel of sport car ,if you want i can ask him how much he will ask for making it.
Guy |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|