Whitty is a happy man !!
there was a package arrive for me yesterday that put a smile on my face even if the wife did go "oh no!" i think it means cos she will loose me for a good couple of days while i'm outside working !
| ZX16V.net http://zx16v.net/forum/ |
|
| head http://zx16v.net/forum/viewtopic.php?f=17&t=314 |
Page 1 of 1 |
| Author: | whitty_zx [ Wed Mar 21, 2007 6:34 pm ] |
| Post subject: | head |
Whitty is a happy man !! there was a package arrive for me yesterday that put a smile on my face even if the wife did go "oh no!" i think it means cos she will loose me for a good couple of days while i'm outside working !
|
|
| Author: | ZX-Cruiser [ Wed Mar 21, 2007 11:27 pm ] |
| Post subject: | |
Flowed? |
|
| Author: | edsonmassao [ Thu Mar 22, 2007 3:43 am ] |
| Post subject: | |
more more more flow? |
|
| Author: | whitty_zx [ Thu Mar 22, 2007 10:45 pm ] |
| Post subject: | |
flowed.polished ect and piper cams |
|
| Author: | ZX-Cruiser [ Fri Mar 23, 2007 7:34 pm ] |
| Post subject: | |
Sounds good. It seems to be the standard head is quite good already, to get some horses out of it by polishing you really need to know what you're doing. A pair of racy cams is obviously gonna give quite some horses 
|
|
| Author: | whitty_zx [ Sat Mar 31, 2007 11:19 pm ] |
| Post subject: | |
well things have started to move i spent a couple of hours on the zx today !!! woohoo its a miricle the wife let me have some time to myself! so the exhaust is wrapped and before any of you ask no i will not do yours !! it was a t**t of a job even with the head off i did toy with the idea of taking the whole manifold off but i coudn't be assed (maybe it might have been easier if i had !) 
|
|
| Author: | ZX-Cruiser [ Sun Apr 01, 2007 12:16 pm ] |
| Post subject: | |
Hehe would have been far easier if you had taken it off, in this state it would have come off easily 
|
|
| Author: | whitty_zx [ Sun Apr 01, 2007 12:36 pm ] |
| Post subject: | |
i beg to differ !! the next join is where the cat used to be and if i had split that joint then i would have had to get a new carbon ring to get it to seal again and i know from expeiriennce that is an odd size and you cant get them off the shelf which would mean playing around with an exhaust leak the moment the head goes bak on too much hassle ! so i strugled and did it with the manifold in place |
|
| Author: | Ross [ Sun Apr 01, 2007 2:01 pm ] |
| Post subject: | |
looks great, should help keep the temps down in the engine bay.
Have you done the whole system or just the down pipe? |
|
| Author: | whitty_zx [ Mon Apr 02, 2007 12:06 pm ] |
| Post subject: | |
have done the all the way back to the end of the manifold which is approxamatly where the gear leaver is. |
|
| Author: | Max16V [ Tue Apr 03, 2007 4:51 am ] |
| Post subject: | |
whitty, are those reprofiled cams? What lift and duration are you running? |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|