He posted that he fixed his ACAV and it's running properly now
| ZX16V.net http://zx16v.net/forum/ |
|
| car not pulling right? http://zx16v.net/forum/viewtopic.php?f=17&t=395 |
Page 1 of 1 |
| Author: | dugy cam [ Fri May 30, 2008 1:30 am ] |
| Post subject: | car not pulling right? |
just a wee question i think its the diaphrams that arint wrking but might be wrong. wen im in 3 4 5 even 2 it seem to take ages to rev from 3000rpm to about 4000rpm any ideas wats wrong if not the diaphrams |
|
| Author: | Razkin [ Fri May 30, 2008 2:47 pm ] |
| Post subject: | |
Checking the diaphrams is easy. Start the car and let it idle. Open the hood en let it rev, you should see the the diaphrams open up the valves in the intake. Be sure to check that first. If the diaphrams are working, check your ECU for errors. You know if there is an error when the ECU symbol stays lit for about 7 seconds after you started the car. To read the ECU errors, check the guide at www.zx16v.net |
|
| Author: | dugy cam [ Fri May 30, 2008 6:13 pm ] |
| Post subject: | |
good stuff good stuff.will try a little fiddling.it cums and goes so sumthing is faultly |
|
| Author: | dugy cam [ Sat Jul 12, 2008 1:39 am ] |
| Post subject: | |
just to say i was the diaprams got new ones 39 bucks each well worth it the beasts back up to power |
|
| Author: | marcinmrc [ Sun Jul 13, 2008 2:13 am ] |
| Post subject: | |
i don't understand your last post.. maybe your acav is not working properly ? |
|
| Author: | ZX-Cruiser [ Sun Jul 13, 2008 8:19 pm ] |
| Post subject: | |
He posted that he fixed his ACAV and it's running properly now
|
|
| Author: | marcinmrc [ Sun Jul 13, 2008 10:37 pm ] |
| Post subject: | |
 ok thanks, now it sounds easier
|
|
| Author: | dugy cam [ Tue Jul 15, 2008 3:27 pm ] |
| Post subject: | |
sory mate iam rubbish at writing/spelling so i can easily confuse peolpe 
|
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|