ZX16V.net
http://zx16v.net/forum/

206RC engine into zx16v
http://zx16v.net/forum/viewtopic.php?f=17&t=730		 Page 1 of 1
Author:  devil9 [ Sun Aug 19, 2012 11:58 am ]
Post subject:  206RC engine into zx16v
Guys, anyone ever fitted a 206RC engine onto zx16V?

Any thoughts on this conversion?
Author:  ZX-Cruiser [ Wed Aug 29, 2012 10:20 pm ]
Post subject:  Re: 206RC engine into zx16v
It's EW10 instead of XU10, so probably will be different, less plug and play.
Why would you, for just those 10 extra HP?
Author:  welshpug [ Fri Aug 31, 2012 11:18 pm ]
Post subject:  Re: 206RC engine into zx16v
more torque, lots more, also a lot lighter, newer, massively less susceptible to oil surge+starvation.
Author:  devil9 [ Sun Sep 02, 2012 10:26 am ]
Post subject:  Re: 206RC engine into zx16v
bingo welshpug...

mine is not version 2 ie my current bhp is estimated 150-155. It's also on superchip.

206RC at 180hp is a substantial gain compared to using a gti-6 engine@167hp.

As welshpug said, 206RC engine is also much lighter, torquey while maintaining zx handling & setup.

what i like best about zx is its simple interior and dashboard. look timeless cheesygrin

but to fit a 206RC engine, i need to use 206 dashboard & wiring setup sad
Author:  ZX-Cruiser [ Sun Sep 02, 2012 10:32 am ]
Post subject:  Re: 206RC engine into zx16v
I dont think so, IF you use standalone engine management. Often you will also gain a few HP just by doing that, also you have the perfect base for future tuning (camshafts, ITB's? etc)
Author:  talbotsteve [ Fri Sep 07, 2012 8:31 pm ]
Post subject:  Re: 206RC engine into zx16v
I wouldn't bother with the wiring and look into a stand alone mappable ECU, wouldn't mind one of these for the xsara.....
Page 1 of 1 All times are UTC + 2 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/