nic elooking car.so u get a nice noise out the exsuast looks lovely allways like that along with the bumber.had to special make mine similair to that one just lower

I,ve had an accedent with the zx

Look here for al the pictures from the accedent
http://www.mijnalbum.nl/Album=GESE8MNE
But i have make a plan with a other forum member (Razkin) to rebuild the zx on a other boddy.
We have completely stripped him


Look here fot pictures from the hole project
http://www.mijnalbum.nl/Album=AAOZ4MC7
The plan is to make the Zx better than new
o we overhaul the ingene, gearbox.
With better parts

You forgot to strip the 16v logo

No i got them here. We thug them off just before we leave.
This is the coller that i want

a total rebuilt ooooo intruging .hey thats the same coulour i wantmy wide arch well near enuf electric blue same colour as antif reeze

Looks too much like Blue Grand Pavosi imho

Here the same color. Only bether picture

I like it in a 200+hp Zx

The rebuild is stil in progress. the body is now almost rady. here some pictures.
This is the (new) chassis

We have strengthened the chassis by welding



Whe have a lot of rust removed from the chassis. it disappointed me how much rust there was on the zx
Whe have strippet 3 Zx 16v,s and al of them have a lot of rust in the door sils. And wheel cabinets. So check your Zx



Door sils removed

I removed all of the paint on the underside. And there was no rust

The chassis is finaly ready for rebuild after 8 months A have alrady make 136 picturs of the whole project. You can check them here!
http://www.mijnalbum.nl/Album=AAOZ4MC7

thats sum project u have going there loads of fun though i bet

wow respect for your rebuild man.

ik know much work it is some one i know is doing the same with a bx 16v
great projects and the coler you want to make it is super.
i can't wait to see it when its done.

Thanks gays! I dont like te chassis work anemore because its to much work. only the job have to be done. Now comes the nice job. Yesterday i get powdercoat stuf back.

wooow! really impressive

I changed my mind about the color.

I start with the rebuild

Rebuild stil in progress it got his front wheels back and the steering wheel also.
the front wisbone,s are rebuild whit this


Peugeot 306 Gti-6 Competition Front Wishbone Rebuild Kit

This kit comprises of the following components: -

2 x Powerflex Competition Front Wishbone Front Bushes

2 x Spoox Motorsport Competition Front Wishbone Rear Mounts

2 x Lower Wishbone Ball Joints (With 16mm Dia Pin)

2 x Genuine Peugeot Wishbone to Hub Securing Bolt & Nuts

This kit allows you to completely rebuild both front wishbones on all Peugeot 306 Gti-6 Models with 16mm front wishbone balljoints using Powerflex and Spoox Motorsport uprated bushes. The securing bolts supplied are a common wear & stress point and will improve driveability as well as increased safety.

A must for all Fast Road, Track, Race and Rally cars.