hi
this summer i was working with my second citroen zx 16v. I bought this car because i need some parts to my green 16v.



in a beginning of spring I decided to make cabrio like "vent'd'quest" by heuliez. the photos below.




now i have a lot of work to do. first I need to fix the corrosion and paint the car with a new color. I want to make cabrio with leather seats, a/c, all side moldings like regular 16v and with original rims but without any roof

do u like it ?

I like your plans. Onley now it looks like a peace of junk. You got a lot of work to do to make it a nice car. And did you give the car more steel to make it stronger? And what if its going to rain?

Maybe you can use te soft top of the peugeot 306 cabrio?

I hope you can make a nice first zx cabrio.

in the future i will put more steel into this car. i don't have a lot of free time so I do what I can. i think when car gets new paint and side moulding it will look better. i had a lot of work with the corrosion, doors are from other version, not from 16v

It's certainly different , there's some work invlolved but it if done correctly could be a real eyecatcher , a convertible is probably not the best choice for your climate a 4x4 Zx might have been a better bet

Mark

Quite a project you have there.
The lines as the car now has, doesn't look that good to be honest. Make it a two seater and design/shape the rear with a boot so that it will look as if it had never been a four seater. That way you can easily strenghten the car(even more rigid than the original ZX).

This probably is the first mod of this kind for a ZX, respect

I think the window turn over when you speeding!

it looks like 'drive there and never come back' ;D

hello again
this summer weather in Poland wasn't so bad so i spent some time in my cabrio
original rims, side moldings, leather seats, a/c and roof like hardtop with plans trimmed with leather

results.. i mean first civil CITROEN ZX 16V CABRIO below!

by the way vent'd'quest has been propably sold for 14500 euro

new fotos of cabrio
i don't have enough time to work with it.

vent d'oest have 1.8 engine, so mine it is only one 2.0i cabrio

I have stopped with this project. Metalwork and breaks was in very bad condition so I decide to scrap it. .